Weaning Pen Assembly

Image_0918

  1. Assemble Whelping Box as directed.
  2. When adding the weaning pen, remove the front four bolts and knobs from whelping box.
  3. Insert longer carriage bolts provided in Weaning Pen box, through the wall of the whelping box, through the front of the whelping box and then add on the side wall of the weaning pen.  So you will actually have 3 separate pieces adjoining with the longer carriage bolts.
  4. Once both sides of the weaning pen are in place, then use the 4 bolts and knobs taken off of the front of the existing box and attach the front panel of the weaning pen to the walls of the weaning pen.

 

Note:  We recommend caution and common sense when using the box on a heated floor or surface. To be safe, do not use on a surface that is more than 75 Degrees.

 

RECOMMENDED CLEANING – use a 10 to 1 solution of water to bleach or water to white vinegar and wipe the whelping box with the mixture using a cloth or sponge.  Use clean rinse water and wipe clean with a cloth or sponge and towel dry.  We cannot guarantee how commercial cleaners or chemicals will react or possibly affect the plastic, sealants, or adhesives used in the construction of the box. Please use only bleach and water or vinegar and water to clean. We do not recommend using a hose, power washer, shower or bath tub or submerging the panels in water in any way or run them through a car wash or sprinkler or any combination there of as water could get inside the framework.

 

RECOMMENDED STORAGE – Store the box in its original shipping box after you’ve cleaned it once done using it.  Do NOT store in a place where temperatures exceed 90 degree’s Fahrenheit or fall below 40 degrees Fahrenheit.

 

THE JONART WHELPING BOX COMPANY, INC.
2716 Centennial Road Toledo, OH  43617
419-266-2509

 
Print This Page